Ifilimu ye-SABIC FI0851P HDPE

Umfanekiso oBonisiweyo weFilimu yeSABIC FI0851P HDPE

Inkcazo emfutshane:

Uhlobo lweSABIC

Ifilimu yeHDPE

Yenziwe eSaudi Arabia

Ixabiso:1000-1200 USD/MT

Izibuko:Huangpu / Ningbo / Shanghai / Qingdao

I-MOQ:1*40GP

Inombolo ye-CAS:9002-88-4

Ikhowudi ye-HS:3901200099

Intlawulo:TT/ LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Inkcazo

I-HDPE FI0851P yi-polyethylene resin enobunzima obuphezulu beemolekyuli eyenzelwe ukusetyenziswa kwefilimu evuthuziweyo. Le resin inobunzima obubanzi beemolekyuliukusasazwa okwenza kube lula ukucutshungulwa. Iifilimu ezenziwe ngale resin zibonisa ukuqina okuphezulu, impembelelo entle kunye neempawu zokuqina.

Amaxabiso ePropati aqhelekileyo

IIPROPATI	IINQOBO EZIQHELEKILEYO	IIYUNITHI	IINDLELA ZOKUVAVANYA
IIPROPATI ZEPOLYMER
Izinga lokuhamba koMbane (i-MFR)
kwi-190 °C kunye ne-21 kg	8	dg/min	I-ASTM D1238
kwi-190 °C kunye ne-2.16 kg	0.05	dg/min	I-ASTM D1238
Uxinano
Uxinano	0.951	g/cm³	I-ASTM D792
IIPROPATI ZOMKHANYA
Uvavanyo lokuxinana
amandla oxinzelelo @ yield, MD	35	I-MPa	I-ASTM D882
amandla oxinzelelo @ yield, TD	30	I-MPa	I-ASTM D882
amandla oxinzelelo @ Break, MD	50	I-MPa	I-ASTM D882
amandla oxinzelelo @ Break, TD	48	I-MPa	I-ASTM D882
Uxinzelelo lwe-Elongation @ Break, MD	490	%	I-ASTM D882
Uxinzelelo lwe-Elongation @ Break, TD	500	%	I-ASTM D882
I-Elmendorf Tear Strength, MD	17	gf	I-ASTM D1922
I-Elmendorf I-Knowledge Strength, TD	30	gf	I-ASTM D1922
Impembelelo yokuwa kweDart	340	g	I-ASTM D1709
IIPROPATI ZOKUFUDUMALA
Ubushushu bokuthambisa bukaVicat
Ubushushu bokuthambisa bukaVicat	126	°C	I-ASTM D1525

Izicelo

• Ibhegi yokuthenga
• Ingxowa yenkunkuma
• I-liner yemizi-mveliso

Iimeko Zokucubungula

Iimeko eziqhelekileyo zokucubungula i-FI0851P zezi:

Ubushushu bokunyibilika: 250°C

Ubushushu bomngundo: 15-60°C

Uxinzelelo lwenaliti: 600 - 1000 Bar

Ukugcina Nokuphatha

Izinto zepolyethylene mazigcinwe ngendlela yokuthintela ukuvezwa ngqo elangeni kunye/okanye kubushushu. Indawo yokugcina kufuneka yome kwaye kungcono ingadluli kwi-50°C. I-SABIC ayizukunika isiqinisekiso kwiimeko ezimbi zokugcina izinto ezinokukhokelela ekuwohlokeni komgangatho njengokutshintsha kombala,Ivumba elibi kunye nokusebenza kakubi kwemveliso. Kucetyiswa ukuba kucutshungulwe i-PE resin zingadlulanga iinyanga ezi-6 emva kokuziswa.

Isikhanyeli

Naluphi na uthengiso lwe-SABIC, amacandelo ayo kunye namaqabane ayo (ngamnye “ungumthengisi”), lwenziwa kuphela phantsi kwemiqathango esemgangathweni yokuthengisa yomthengisi (efumaneka xa iceliwe) ngaphandle kokuba kuvunyelwene.kungenjalo kubhaliwe kwaye kusayinwe egameni lomthengisi. Nangona ulwazi oluqulethwe apha lunikezelwa ngokunyaniseka, uMthengisi AKANIKEZI SIqinisekiso, ESICACILEYO OKANYE ESINGACACISIWEYO,KUQUKA UKUTHENGISWA NOKUNGAPHULI IMPAHLA YENGQONDO, AKUTHATHI NALUPHI NA UXANDUVA, NGOKUTHE NGQO OKANYE NGOKUNGQONGILEYO, NGOKUPHATHELELEYOUKUSEBENZA, UKUFANELEKA OKANYE UKUFANELEKA KOKUSETYENZISWA OKUJOLISWEYO OKANYE INJONGO YALE MVELISO KULO NALUPHI NA USETYENZISO. Umthengi ngamnye kufuneka amisele ukufaneleka kwezixhobo zomthengisi ukuze zisetyenziswe ngumthengi ngovavanyo olufanelekileyo kunye nohlalutyo. Akukho ngxelo yomthengisi malunga nokusetyenziswa okunokwenzeka kwayo nayiphi na imveliso, inkonzo okanye uyilo ejoliswe, okanye ekufuneka itolikwe, ukunika nayiphi na ilayisenisi phantsi kwayo nayiphi na ilungelo lobunikazi okanye elinye ilungelo lobunini bobukrelekrele.

Ngaphambili: Ukubumba kweLotrene Q5502BN HDPE Blow

Okulandelayo: Ifilimu ye-SABIC FI0750 HDPE