Ifilimu yeMarlex TRB-115 HDPE

Umfanekiso oBonisiweyo weFilimu yeMarlex TRB-115 HDPE

Inkcazo emfutshane:

Uhlobo lweMarlex

Ifilimu yeHDPE

Yenziwe eMelika

Ixabiso:1000-1200 USD/MT

Izibuko:Huangpu / Ningbo / Shanghai / Qingdao

I-MOQ:1*40GP

Inombolo ye-CAS:9002-88-4

Ikhowudi ye-HS::3901200099

Intlawulo:TT/ LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Inkcazo

• Uzinzo oluhle lwebhamuza kunye nokutsalwa kwefilimu.
• Amandla nokuqina okuphezulu.
• Ukuqina okugqwesileyo kunye namandla okutsalwa.
• Amandla okukrazula alinganayo.

Izicelo

• Iingxowa zeT-shirt
• Iingxowa zemveliso
• Iingxowa zempahla
• Iinqanawa zemizi-mveliso
• Iiplastiki zenkunkuma

Iinkcukacha

I-FDA 21 CFR 177.1520(c) 3.2a. I-resin ingasetyenziswa xa idibene nazo zonke iintlobo zokutya njengoko kuchaziwe kwiTheyibhile 1, 21 CFR 176.170(c) kwaye xa isetyenziswa i-BH njengoko kuchaziwe kwiTheyibhile 2, 21 CFR 176.170(c).

Iipropati zeResin ezibizwa ngokuba yiNominal	IsiNgesi	SI	Indlela
Isalathisi sokunyibilika, 190 °C/2.16 kg	-	0.06 g/10 imizuzu	I-ASTM D1238
I-HLMI, 190 °C/21.6 kg	-	9.5g/10 imizuzu	I-ASTM D1238
Uxinano	-	0.950 g/cm³	I-ASTM D1505

Iipropati zeFilimu eziQhelekileyo ezibizwa ngokuba yi-Nominal Blown Film kwi-0.5 mil¹	IsiNgesi	SI	Indlela
I-Dart	260 g/mil	100 N/mm	I-ASTM D1709
I-Elmendorf Tear MD	15 g/mil	6 N/mm	I-ASTM D1922
I-Elmendorf Inyembezi TD	450 g/mil	174 N/mm	I-ASTM D1922
Amandla okuThamba kwiBreak MD	13,000 psi	90 MPa	I-ASTM D882
Amandla okuThamba kwiBreak TD	6,000 psi	41 MPa	I-ASTM D882
Ukwandiswa kweTensile kwiBreak MD	260%	260%	I-ASTM D882
Ukwandiswa kweTensile kwiBreak TD	570%	570%	I-ASTM D882
I-1% yeSecant Modulus MD	120,000 psi	I-827 MPa	I-ASTM D882
I-1% yeSecant Modulus TD	140,000 psi	I-965 MPa	I-ASTM D882

Ifilimu eyi-0.5 mil (12.7 micron) iveliswe kusetyenziswa i-grooved-feed extruder ngesantya se-225 lb/h kunye nokuphakama kwesiqu se-7 x Die Diameter, i-4:1 Blow-Up
Ireyithiyo (BUR), ububanzi bedayi eyi-intshi ezi-6 kunye nomsantsa wedayi eyi-intshi eziyi-0.040. Iimpawu eziqhelekileyo ezichazwe apha zimele imveliso engaphantsi
ezi meko zokucubungula, nangona iipropati zefilimu zinokwahluka ngokuxhomekeke kwiimeko ezithile zokuvuthela ifilimu. Ke ngoko, idatha kufuneka
azisetyenziselwa iinjongo zeenkcukacha.

Ngaphambili: Ifilimu ye-SABIC FI0750 HDPE

Okulandelayo: Ifilimu yeLotrene FD0274 LDPE