Ifilimu yeMarlex HHMTR-144 HDPE

Umfanekiso oBonisiweyo weFilimu yeMarlex HHMTR-144 HDPE

Inkcazo emfutshane:

Uhlobo lweMarlex
I-HDPE| Ifilimu ye-MI=0.18
Yenziwe eSaudi Arabia

Ixabiso:1100-1600 USD/MT

Izibuko:Xingang, Qingdao, Shanghai, Ningbo

I-MOQ:17MT

Inombolo ye-CAS:9003-53-6

Ikhowudi ye-HS:390311

Intlawulo:TT, LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Izicelo

•Ukuqina kunye nokuqina

•Ukusebenziseka kakuhle

•Iimpawu ezilungileyo zokuxuba ngee-resin ze-HDPE HMW

Izicelo eziqhelekileyo zeHHM TR-144 ziquka:

•Iingxowa zeT-shirt

•Iiliner ezinamadonga amaninzi

•Iingxowa zenkunkuma

Le resin iyahlangabezana nale migaqo ilandelayo:

•I-FDA 21 CFR 177.1520(c) 3.2a

•Inombolo ye-EU 10/2011

Ukuze ufumane iPhepha leDatha yoKhuseleko lwezinto (i-MSDS), ndwendwela iwebhusayithi yethu ku-www.saudipolymers.com

Iipropati zeResin ezibizwa ngokuba yiNominal	Ixabiso (iiYunithi ze-SI)	Indlela
Uxinano	0.946 g/cm3	I-ASTM D1505
Isalathisi sokunyibilika, Imeko eyi-190°C / 2.16 kg	0.18 g/10 imizuzu	I-ASTM D1238
Ubungqindilili bobushushu, i-Type A clamp, i-Type I sampuli	<-75°C	I-ASTM D746
ESCR, Imeko B (100% Igepal), F50	>iiyure ezili-1000	I-ASTM D1693
I-Flexural Modulus, i-Tangent - 16:1 span:ubunzulu, 12.7 mm/min	1150 MPa	I-ASTM D790
I-Dart Drop (66 cm)	90 g	I-ASTM D1709
Amandla okuThamba xa iVula, 50.8 mm/min MD	24 MPa	I-ASTM D882
Amandla okuThamba xa iVula, 50.8 mm/min TD	26 MPa	I-ASTM D882
Ukwandiswa ngexesha lokuphumla, 50.8 mm/min MD	480%	I-ASTM D882
Ukwandiswa ngexesha lokuphumla, 50.8 mm/min TD	640%	I-ASTM D882
I-Elmendorf Tear Strength, MD	19 g	I-ASTM D1922
I-Elmendorf I-Knowledge Strength, TD	270 g	I-ASTM D1922

1. Iimpawu ezibhalwe apha ziyafana nemveliso, kodwa azibonisi umahluko oqhelekileyo wovavanyo kwaye ke ngoko akufuneki zisetyenziselwe iinjongo zenkcazo. Amaxabiso ajikeleziswe.

2. Iimpawu zomzimba zichongiwe kwiisampuli ezibunjiweyo ezicinezelweyo ezilungiselelwe ngokuhambelana neNkqubo C ye-ASTM D4703, iSihlomelo A1.

3. Isekelwe kwifilimu ye-0.025 mm eyenziwe ngomlinganiselo we-4:1 blow-up.

Ngaphambili: Umbhobho we-SABIC P6006 HDPE

Okulandelayo: Wanhua 23050 HDPE Umbhobho