English
  • intloko_ibhena_01

I-LDPE FD0374

LDPE FD0374 Umfanekiso okhoyo
  • I-LDPE FD0374

Inkcazelo emfutshane:

Lotrene Brand

LDPE|Ifilimu MI=3.5

Yenziwe eQatar


  • Ixabiso:1000-1200 USD/MT
  • Izibuko:Huangpu / Ningbo / Shanghai / Qingdao
  • MOQ:1 * 40GP
  • Inombolo yeCAS:9002-88-4
  • Ikhowudi ye-HS:3901100090
  • Intlawulo :TT/LC
    • Khuphela njengePDF

    Iinkcukacha zeMveliso

    Inkcazo

    I-Lotrène® FD0374 icetyiswa ikakhulu ngokukhutshwa kwefilim ebhityile kakhulu kwimisebenzi yokukhanya.Iqulethezombini izongezo ze-slip (kujoliswe kwi-600 ppm erucamide) kunye ne-anti blocking additives (ithagethi ye-900 ppm) kunye ne-antioxidants.

    Iipropati

    I-Lotrène® FD0374 inika ukucaca okugqwesileyo, iglosi ephezulu kunye neefilimu zenkungu ephantsi.Ikwabonisa nokuqhubekeka okugqwesileyokwaye uzobe phantsi.
    IIPROPATI ZEPOLYMERA VALUE IYUNITHI INDLELA YOVAVANYO
    Melt Flow Index 3.5 g/10 imiz. I-ASTM D-1238
    Uxinzelelo @ 23 °C 0.923 g/cm3 I-ASTM D-1505
    Indawo enyibilikayo yeCrystalline 108 °C I-ASTM E-794
    I-Vicat Softening Point 89 °C I-ASTM D-1525
    IIPROPATI FILM VALUE IYUNITHI INDLELA YOVAVANYO
    Amandla Okuqina @ Yield MD/ TD 11/11 MPa I-ASTM D-882
    Amandla Okuqina @ Ikhefu MD/ TD 25/22 MPa I-ASTM D-882
    Elongation @ Break MD/ TD 320/600 % I-ASTM D-882
    Amandla empembelelo, F 50 100 g I-ASTM D-1709
    Ukuxhathisa kweenyembezi MD/TD
    		 65/35 N/mm I-ASTM D-1922
    I-Coefficient of friction
    		 0.11 - I-ASTM D-1894
    Inkungu
    		 8 % I-ASTM D-1003
    Iglosi @ 45°
    		 56 - I-ASTM D-2457

    (Iimpawu zefilimu ezichazwe ngasentla zifunyenwe kusetyenziswa iifilim eziyi-40 µm ezivuthelweyo zesampulu zovavanyo lwaselabhorethri eziveliswe phantsi kweemeko ezilandelayo: 45 mm isikrufu nge-L/D = 30, idayamitha ye-120 mm, i-gap yokufa 1.56 mm, BUR 2.5:1).

    Iyaqhuba

    I-Lotrène® FD0374 inokusetyenzwa ngokulula kuzo zonke iintlobo ze-extruder ukwenza iifilimu ezivuthelweyo okanye eziphosiweyo.
    Ubushushu bokunyibilika bucetyiswa ukuba bube kuluhlu lwe-140-150 °C.
    Ezona mpawu zibalaseleyo zefilimu evuthelweyo ziphunyezwa ngokomlinganiselo wokuvuthela phakathi kwe-2:1 kunye ne-3:1.
    Ukunqanda ukuvaleka kunye nokuncipha kwi-reel, ubushushu kwi-nip rolls kunye nokusuka kufuneka kugcinwe ngokusondeleyo kangangoko kunokwenzeka kwiqondo lobushushu elijikelezayo.
    Uluhlu olucetyiswayo lokutyeba luvela kwi-20 μm ukuya kwi-100 μm.

    Usetyenziso

    • Ifilimu yokupakisha umsebenzi olula
    • Ifilimu yokuhlamba impahla
    • Bonisa ifilim
    • Iingxowa zokubhaka
    • Isinxibo kunye nefilimu yephephandaba

    Ukuphatha kunye noGcino

    Iimveliso zepolyethylene kufuneka zigcinwe kwipakethe yazo yokuqala okanye kwiisilo ezifanelekileyo ezifanelekileyo.
    Iimveliso kufuneka zigcinwe kwindawo eyomileyo nengena umoya kwaye akufuneki zibe sesichengeni selanga kunye/okanye ubushushu nangaluphi na uhlobo kuba oku kunokuchaphazela kakubi iipropati zabo.
    Njengomthetho jikelele, iimveliso zethu akufanele zigcinwe ngaphezu kweenyanga ezintathu ukusuka kumhla wokufunyanwa.

    Ukhuseleko

    Phantsi kweemeko eziqhelekileyo iimveliso ze-Lotrène® azivezi ingozi eyityhefu ngokudibana nolusu okanye ukuphefumla.
    Ngolwazi oluneenkcukacha nceda ubhekisele kwiPhepha leDatha yoKhuseleko.

    Uqhagamshelwano lokutya kunye nokufikelela

    Iimveliso zeLotrène® polyethylene ezenziwe yiQatar Petrochemical Company (QAPCO) QSC ithobela i-US, EU kunye neminye imithetho yoqhagamshelwano lokutya.Imida ingasebenza.Nceda uqhagamshelane nommeli wakho wakwaMuntajat ngezatifikethi zokuthobela ezineenkcukacha.
    Zonke iimveliso ze-QAPCO Lotrène zithobela iREACH Regulation 1907/2006/EC.Iinjongo zalo mmiselo kukuphucula ukukhuselwa kwempilo yabantu kunye nokusingqongileyo ngokuchongwa ngcono nakwangoko kweempawu zendalo zemichiza.

    AYIZIFANELEKILEYO IZICELO ZAMAYEZA OKANYE ZONYANGO

    Iimveliso ze-Lotrène® azifanelekanga kwizicelo zamayeza okanye zonyango.

    I-Technical Disclaimer

    Amaxabiso achazwe kweli phepha ledatha yezobugcisa ziziphumo zeemvavanyo ezenziwa ngokuhambelana novavanyo oluqhelekileyoiinkqubo kwindawo yelabhoratri.Iipropati ezizizo zinokwahluka ngokuxhomekeke kwibhetshi kunye neemeko ze-extrusion.Ngoko ke, la maxabiso akufunekanga asetyenziselwe iinjongo ezithile.Ngaphambi kokusebenzisa le mveliso, umsebenzisi uyacetyiswa kwaye uyalunyukiswa ukuba azenzele isigqibo kunye novavanyo lwemveliso.ukhuseleko kunye nokufaneleka kwemveliso kusetyenziso oluthile ekuthethwa ngalo, kwaye uyacetyiswa ngakumbi ngokuchasene nokuxhomekekaulwazi oluqulethwe apha njengoko lunokunxulumana nalo naluphi na usebenziso oluthile okanye
    isicelo.
    Kuluxanduva lokugqibela lomsebenzisi ukuqinisekisa ukuba imveliso ifanelekile, kwaye ulwazi luyasebenzaukuya, isicelo esithile somsebenzisi.I-Muntajat ayenzi, kwaye ichaza ngokucacileyo, zonke iziqinisekiso, kubandakanywaiziqinisekiso zokurhweba okanye ukulungela injongo ethile, kungakhathaliseki ukuba ngomlomo okanye kubhaliwe, kuchaziweokanye kuthethwa, okanye kutyholwa ngokuba ivela kuko nakuphi na ukusetyenziswa kwalo naluphi na urhwebo okanye kuyo nayiphi na indlela yokuthengisa, ngokunxulumene noukusetyenziswa kolwazi oluqulethwe apha okanye imveliso ngokwayo.
    Umsebenzisi uthatha ngokucacileyo yonke imingcipheko kunye namatyala, nokuba kusekwe kwikhontrakthi, i-tort okanye ngenye indlela, ngokunxibelelenengokusetyenziswa kolwazi oluqulethwe apha okanye imveliso ngokwayo.Iimpawu zokurhweba azivumelekanga ukuba zisetyenziswe nangayiphi na indlelangaphandle kokugunyaziswa ngokucacileyo kwisivumelwano esibhaliweyo kwaye akukho phawu lorhweba okanye amalungelo elayisensi yalo naluphi na uhlobo anikiweyoapha ngezantsi, ngentsingiselo okanye ngenye indlela.
  • Ngaphambili:
  • Okulandelayo:

    • Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala