LLDPE 218WJ

Inkcazelo emfutshane:

Sabic Brand
LLDPE| Ifilimu MI=2
Yenziwe eSaudi Arabia

Ixabiso :1100-1600 USD/MT

Izibuko :Xingang, Qingdao, Shanghai, Ningbo

MOQ:17MT

Inombolo yeCAS:9003-53-6

Ikhowudi ye-HS:390311

Intlawulo :TT, LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Inkcazo

I-218WJ yi-butene Linear Low Density Polyethylene TNPP ibakala lasimahla elilungele ukupakishwa kwenjongo ngokubanzi. Kulula ukusetyenzwa ngokunika iipropathi ezilungileyo zokuqina, amandla empembelelo kunye neempawu ezibonakalayo. I-218WJ iqulethe izongezo ze-slip kunye ne-antiblock.

Iipropati

Ifilimu yokuLamination, iilayini ezibhityileyo, iingxowa zokuthenga, iibhegi zokuthwala, iingxowa zenkunkuma, iifilimu ezidityanisiweyo, ukupakishwa kwabathengi kunye nezinye iinjongo eziqhelekileyo.

IIPROPATI	IINDLELA EZIQHELEKILEYO	IIUNITHI	INDLELA YOVAVANYO
IIPROPATI ZEPOLYMERA
Melt Flow Rate
kwi-190 ° C kunye ne-2.16 kg	2	g/10 imiz	I-ASTM D1238
Ukuxinana	918	kg/m³	I-ASTM D1505
UKWAKHIWA
I-arhente yokutyibilika	√	-	Indlela ye-SABIC
I-arhente ye-anti block	√	-	Indlela ye-SABIC
IIPROPATI ZOKUBONA
Inkungu	13	%	I-ASTM D1003
Iglosi
ku-60 °	80	-	I-ASTM D2457
IIPROPATI FILM
Iipropati ze-Tensile
uxinzelelo kwikhefu, MD	35	MPa	I-ASTM D882
uxinzelelo ngexesha lekhefu, TD	29	MPa	I-ASTM D882
ubunzima ngexesha lekhefu, MD	700	%	I-ASTM D882
ubunzima ngexesha lekhefu, TD	750	%	I-ASTM D882
uxinzelelo kwisivuno, MD	12	MPa	I-ASTM D882
uxinzelelo kwisivuno, TD	10	MPa	I-ASTM D882
I-1% ye-secant modulus, MD	220	MPa	I-ASTM D882
1% secant modulus, TD	260	MPa	I-ASTM D882
Ukumelana nokuhlatywa	63	J/m	Indlela ye-SABIC
Amandla eMpembelelo yeDart	85	g	I-ASTM D1709
Elmendorf Tear Amandla
MD	130	g	I-ASTM D1922
TD	320	g	I-ASTM D1922
IIPROPATI ZOKUTHETHA
I-Vicat Softening Point	98	°C	I-ASTM D1525

(1) Iimpawu zoomatshini zilinganiswe ngokuvelisa ifilimu ye-30 μ kunye ne-2.5 BURusing 100% 218NJ.

Iimeko Zokusebenza

Iimeko eziqhelekileyo zokulungiswa kwe-218WJ zezi: Ubushushu obunyibilikayo: 185 - 205 ° C, umlinganiselo wokuvuthela: 2.0 - 3.0.

Impilo, uKhuseleko kunye neMimiselo yoQhagamshelwano lokutya

I-resin ye-218WJ ifanelekile kwisicelo soqhagamshelwano lokutya. Iinkcukacha ezithe vetshe zinikiwe kwiNkcukacha yoKhuseleko lweMaterial efanelekileyo kwaye ngolwazi olongezelelekileyo nceda uqhagamshelane nommeli wasekuhlaleni we-SABIC ukufumana isatifikethi. INKCAZELO: Le mveliso ayijoliswanga kwaye ayifanele isetyenziswe kuyo nayiphi na i-pharmaceutical / applications zonyango.

Ukugcinwa kunye nokuphatha

I-polyethylene resin kufuneka igcinwe ngendlela yokuthintela ukukhanya kwelanga kunye / okanye ubushushu. Indawo yokugcina kufuneka yomile kwaye kukhethwa ukuba ingagqithi kwi-50 ° C. I-SABIC ayinakunika iwaranti kwiimeko ezimbi zokugcina ezinokukhokelela ekuweni komgangatho onjengokutshintsha kombala, ivumba elibi kunye nokusebenza kakubi kwemveliso. Kucetyiswa ukuba kusetyenzwe i-PE resin phakathi kweenyanga ezi-6 emva kokunikezelwa.

Ngaphambili: Umfanekiso we-LDPE FD0474

Okulandelayo: LLDPE 222WT