HDPE P6006

Inkcazelo emfutshane:

Sabic Brand
HDPE| PE100 Mnyama
Yenziwe eSaudi Arabia

Ixabiso :1100-1600 USD/MT

Izibuko :Xingang, Qingdao, Shanghai, Ningbo

MOQ:17MT

Inombolo yeCAS:9003-53-6

Ikhowudi ye-HS:390311

Intlawulo :TT, LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Inkcazo

I-FDA 21 CFR 177.1520(c) 3.2a. I-resin ingasetyenziselwa ukudibanisa nazo zonke iintlobo zokutya njengoko kuchazwe kwiThebhile 1, 21 CFR 176.170 (c) kunye neemeko zokusetyenziswa kwe-BH njengoko kuchazwe kwiThebhile 2, 21 CFR 176.170 (c).

Usetyenziso

Le bimodal high ubunzima molekyuli, ingxinano eliphezului-polyethylene (HMW-HDPE) i-ethylene-hexene copolymer yieyenzelwe usetyenziso lweefilimu ezivuthelweyo ezifuna:

• Ukuzinza kakuhle kweqamza kunye nokutsalwa kwefilimu
• Amandla empembelelo ephezulu kunye nokuqina
• Ukuqina okugqwesileyo kunye namandla okuqina
• Amandla eenyembezi alungeleleneyo

Usetyenziso lwefilimu oluvuthelweyo lubandakanya:

• Iibhegi zeT-shirt
• Ukuvelisa iibhegi
• Iingxowa zentengiso
• Iintambo zemizi-mveliso
• Iilitha zenkunkuma

IiPropati zeFilimu eziVuthelweyo eziQelekileyo kwi-0.5 mil1	IsiNgesi	SI	Indlela
I-Dart	260 g/mil	100 N/mm	I-ASTM D1709
Elmendorf Tear MD	15 g/mil	6 N/mm	I-ASTM D1922
Elmendorf Tear TD	450 g/mil	174 N/mm	I-ASTM D1922
Amandla okuqina kwiBreak MD	13,000 psi	90 MPa	I-ASTM D882
Amandla okuqina kwiBreak TD	6,000 psi	41 MPa	I-ASTM D882
I-Tensile Elongation kwi-Break MD	260%	260%	I-ASTM D882
I-Tensile Elongation kwi-Break TD	570%	570%	I-ASTM D882
1 % Secant Modulus MD	120,000 psi	827 MPa	I-ASTM D882
1% iSecant Modulus TD	140,000 psi	965 MPa	I-ASTM D882

Ifilimu ye-0.5 mil (i-12.7 micron) eveliswa ngokusebenzisa i-grooved-feed extruder kwisantya se-225 lb / h kunye nobude be-stalk ye-7 x Die Diameter, i-4: 1 i-Blow-Up Ratio (BUR), i-6 intshi yokufa ububanzi kunye a 0.040 intshi kufa umsantsa. Iimpawu eziqhelekileyo ezichazwe apha zimele imveliso phantsi kwezi meko zokucubungula, nangona iipropati zefilimu zingahluka ngokuxhomekeke kwiimeko ezithile zokuvuthela ifilimu. Ngoko ke, idatha akufanele isetyenziselwe iinjongo ezithile.

Ngaphambi kokusebenzisa le mveliso, umsebenzisi uyacetyiswa kwaye uyalunyukiswa ukuba azenzele isigqibo kunye novavanyo lokhuseleko kunye nokhuseleko.ukufaneleka kwemveliso kusetyenziso olukhethekileyo ekuthethwa ngalo kwaye kucetyiswa ngakumbi ngokuchasene nokuxhomekeka kulwazi oluqulethweApha njengoko inokunxulumana nalo naluphi na usetyenziso okanye usetyenziso oluthile. Luxanduva lokugqibela lomsebenzisi ukuqinisekisa ukuba imvelisoifanelekile kwaye ulwazi lusebenza kwisicelo esithile somsebenzisi. I-Chevron Phillips Chemical Company LP ayifunienze, kwaye akhuphe amabango, zonke iziqinisekiso, kubandakanywa iziqinisekiso zokurhweba okanye ukulungela injongo ethile,kungakhathaliseki ukuba ngomlomo okanye kubhaliwe, kucacisiwe okanye kuyathethwa, okanye kuthiwa kuvela kuko nakuphi na ukusetyenziswa kwalo naluphi na urhwebo okanye kuyo nayiphi na indlelaukujongana nokusetyenziswa kolwazi oluqulethwe apha okanye imveliso ngokwayo. Umsebenzisi uthatha ngokucacileyo yonke ingozikunye noxanduva, nokuba lusekwe kwikhontrakthi, kwityala okanye ngenye indlela, ngokunxulumene nokusetyenziswa kolwazi oluqulethwe apha okanyeimveliso ngokwayo. Ngaphaya koko, ulwazi oluqulethwe apha lunikiwe ngaphandle kokubhekisa kuyo nayiphi na imiba yepropathi enomgangatho ophezulu wokuqonda, ngokunjalonjengokofederal, karhulumente okanye imithetho yasekuhlaleni ekunokuqubisana nayo ekusetyenzisweni kwayo. Imibuzo enjalo kufuneka iphandwe ngumsebenzisi.

Ngaphambili: I-HDPE HE3488LS-W

Okulandelayo: HDPE HHMTR-144