HDPE HHMTR-144

Inkcazelo emfutshane:

UMarlex Brand
HDPE| Ifilimu
Yenziwe eSaudi Arabia

Ixabiso :1100-1600 USD/MT

Izibuko :Xingang, Qingdao, Shanghai, Ningbo

MOQ:17MT

Inombolo yeCAS:9003-53-6

Ikhowudi ye-HS:390311

Intlawulo :TT, LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Usetyenziso

•Ukuqina kunye nokuqina

•Ukuqhubekeka kakuhle

•Iimpawu zokudibanisa ezilungileyo kunye ne-HDPE HMW resins

Usetyenziso oluqhelekileyo lwe-HHM TR-144 lubandakanya:

•Iingxowa ze-T-shirt

•Iintambo ezininzi zodonga

•Iingxowa zenkunkuma

Le resin ihlangabezana nale migaqo:

•I-FDA 21 CFR 177.1520(c) 3.2a

•EU No. 10/2011

NgePhepha leDatha yoKhuseleko lweMathiriyeli (MSDS), tyelela indawo yethu ku-www.saudipolymers.com

Iipropati ze-Nominal Resin	Ixabiso (iiYunithi zeSI)	Indlela
Ukuxinana	0.946 g/cm3	I-ASTM D1505
I-Melt Index, imeko ye-190 ° C / 2.16 kg	0.18 g/10 imiz	I-ASTM D1238
Ubushushu boBuncinci, Uhlobo A ibamba, Uhlobo I sampuli	<-75°C	I-ASTM D746
ESCR, uMqathango B (100% Igepal), F50	> 1000 iiyure	I-ASTM D1693
I-Flexural Modulus, Tangent - 16:1 span:ubunzulu, 12.7 mm/min	1150 MPa	I-ASTM D790
I-Dart drop (66 cm)	90 g	I-ASTM D1709
Amandla e-Tensile kwi-Ield, 50.8 mm / min MD	24 MPa	I-ASTM D882
Amandla okuqina kwiSivuno, 50.8 mm/min TD	26 MPa	I-ASTM D882
Ukwandiswa kwiBreak, 50.8 mm / min MD	480%	I-ASTM D882
Ukwandiswa ngexesha lekhefu, 50.8 mm/min TD	640%	I-ASTM D882
Elmendorf Tear Amandla, MD	19 g	I-ASTM D1922
Amandla eenyembezi e-Elmendorf, TD	270 g	I-ASTM D1922

1. Iimpawu eziqhelekileyo ezichazwe apha zifana nemveliso, kodwa azibonakalisi ukuhluka kovavanyo oluqhelekileyo kwaye ngoko akufanele zisetyenziselwe iinjongo ezicacileyo. Amaxabiso asondezwe.

2. Iimpawu ezibonakalayo zamiselwa kwiisampuli ezibunjiweyo zoxinzelelo eziye zalungiswa ngokuhambelana neNkqubo C ye-ASTM D4703, iSihlomelo A1.

3. Ngokusekelwe kwifilimu ye-0.025 mm eveliswe kwi-4: umlinganiselo we-blow-up ratio.

Ngaphambili: HDPE P6006

Okulandelayo: HDPE 23050