English
  • ibhena_yentloko_01

Umbhobho we-SABIC P6006 HDPE

Umfanekiso oBonisiweyo we-SABIC P6006 HDPE Pipe
  • Umbhobho we-SABIC P6006 HDPE

Inkcazo emfutshane:

Uphawu lweSabic
I-HDPE| I-PE100 Emnyama
Yenziwe eSaudi Arabia


  • Ixabiso:1100-1600 USD/MT
  • Izibuko:Xingang, Qingdao, Shanghai, Ningbo
  • I-MOQ:17MT
  • Inombolo ye-CAS:9003-53-6
  • Ikhowudi ye-HS:390311
  • Intlawulo:TT, LC
    • Khuphela njengePDF

    Iinkcukacha zeMveliso

    Inkcazo

    I-FDA 21 CFR 177.1520(c) 3.2a. I-resin ingasetyenziswa xa idibene nazo zonke iintlobo zokutya njengoko kuchaziwe kwiTheyibhile 1, 21 CFR 176.170(c) kwaye xa isetyenziswa i-BH njengoko kuchaziwe kwiTheyibhile 2, 21 CFR 176.170(c).

    Izicelo

    Lo bunzima be-molecular obuphezulu be-bimodal, uxinano oluphezului-polyethylene (HMW-HDPE) i-ethylene-hexene copolymer yiyenzelwe ukusetyenziswa kwefilimu eqhumayo efuna:

    • Uzinzo oluhle lwebhamuza kunye nokunciphisa ifilimu
    • Amandla nokuqina okuphezulu
    • Ukuqina okugqwesileyo kunye namandla okuxinana
    • Amandla okukrazula alinganiselayo

    Iifilimu eziqhelekileyo ezisetyenziswayo ziquka:
    • • Iingxowa zeT-shirt
    • • Iingxowa zemveliso
    • • Iingxowa zempahla
    • • Iinqanawa zemizi-mveliso
    • • Iiplastiki zenkunkuma
    Iipropati zeFilimu eziQhelekileyo ezibizwa ngokuba yi-Nominal Blown Film kwi-0.5 mil1 IsiNgesi SI Indlela
    I-Dart 260 g/mil 100 N/mm I-ASTM D1709
    I-Elmendorf Tear MD 15 g/mil 6 N/mm I-ASTM D1922
    I-Elmendorf Inyembezi TD 450 g/mil 174 N/mm I-ASTM D1922
    Amandla okuThamba kwiBreak MD 13,000 psi 90 MPa I-ASTM D882
    Amandla okuThamba kwiBreak TD 6,000 psi 41 MPa I-ASTM D882
    Ukwandiswa kweTensile kwiBreak MD 260% 260% I-ASTM D882
    Ukwandiswa kweTensile kwiBreak TD 570% 570% I-ASTM D882
    I-1% yeSecant Modulus MD 120,000 psi I-827 MPa I-ASTM D882
    I-1% yeSecant Modulus TD 140,000 psi I-965 MPa I-ASTM D882

     

    Ifilimu eyi-0.5 mil (12.7 micron) iveliswe kusetyenziswa i-grooved-feed extruder ngesantya se-225 lb/h enobude besiqu se-7 x Die Diameter, i-4:1 Blow-Up Ratio (BUR), ububanzi be-die be-intshi ezi-6 kunye ne-0.040 intshi die gap. Iimpawu eziqhelekileyo ezichazwe apha zimele imveliso phantsi kwezi meko zokucubungula, nangona iimpawu zefilimu zinokuhluka ngokuxhomekeke kwiimeko ezithile zokuvuthela ifilimu. Ke ngoko, idatha akufuneki isetyenziswe kwiinjongo zenkcazo.
    Ngaphambi kokuba usebenzise le mveliso, umsebenzisi uyacetyiswa kwaye uyalumkiswa ukuba enze isigqibo sakhe kunye novavanyo lokhuseleko kunyeukufaneleka kwemveliso kusetyenziso oluthile oluchaphazelekayo kwaye kucetyiswa ngakumbi ukuba ungaxhomekeki kulwazi oluqulethwe kuyoapha njengoko inokunxulumana nayo nayiphi na indlela ethile yokusetyenziswa okanye usetyenziso. Luxanduva lokugqibela lomsebenzisi ukuqinisekisa ukuba imvelisoifanelekile kwaye ulwazi luyasebenza kwisicelo esithile somsebenzisi. I-Chevron Phillips Chemical Company LP ayisebenziukwenza, kunye nokuchasa ngokucacileyo, zonke iziqinisekiso, kuquka iziqinisekiso zokuthengiseka okanye ukufaneleka kwenjongo ethile,nokuba kungomlomo okanye kubhaliwe, ngokuvakalayo okanye ngokungangqalanga, okanye kuthiwa kuvela kuyo nayiphi na indlela yokusetyenziswa korhwebo okanye nakweyiphi na indlelaukusebenzisa ulwazi oluqulethwe apha okanye imveliso ngokwayo. Umsebenzisi uthatha ngokucacileyo yonke ingozikunye noxanduva, nokuba lusekelwe kwisivumelwano, ityala okanye ngenye indlela, ngokunxulumene nokusetyenziswa kolwazi oluqulethwe apha okanyeimveliso ngokwayo. Ngaphezu koko, ulwazi oluqulethwe apha lunikezelwa ngaphandle kokubhekisa kuyo nayiphi na imiba yepropathi yobuchule, ngokunjalonjengeimithetho karhulumente, yephondo okanye yengingqi enokudibaniswa nayo xa isetyenziswa. Imibuzo enjalo kufuneka iphandwe ngumsebenzisi.
  • Ngaphambili:
  • Okulandelayo:

    • Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale