Ifilimu ye-SABIC 920NT LLDPE

Umfanekiso oBonisiweyo weFilimu yeSABIC 920NT LLDPE

Inkcazo emfutshane:

SABIC Tianjin

I-LLDPE| Ifilimu Eqhumayo MI=0.85

Yenziwe etshayina

Ixabiso:1000-1200 USD/MT

Izibuko:Huangpu / Ningbo / Shanghai / Qingdao

I-MOQ:1*40GP

Inombolo ye-CAS:9002-88-4

Ikhowudi ye-HS:3901402090

Intlawulo:TT/ LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Inkcazo

I-SABIC 920NT yi-ethylene-butene copolymer eyenzelwe ukusetyenziswa kwefilimu evuthuzayo. Inamandla agqwesileyo oomatshini, ukukrazuka kunye nokumelana nokubhoboza. I-920NT ayinakutyibilika kwaye ayinayo i-antiblock.

Izicelo eziqhelekileyo

Ifilimu yezolimo, ifilimu enzima, ifilimu yokupakisha esetyenziselwa ngokubanzi, ifilimu eyoluliweyo, ibhegi yokuthwala, i-inner liner, ibhegi yenkunkuma,velisaibhegi, ibhegi eqandisiweyo, ifilimu/ingxowa yokukhupha kunye, njl.

Amaxabiso ePropati aqhelekileyo

IIPROPATI	IINQOBO EZIQHELEKILEYO	IIYUNITHI	IINDLELA ZOKUVAVANYA
IIPROPATI ZEPOLYMER
Izinga lokuhamba kwamanzi anyibilikayo
kwi-190C kunye ne-2.16 kg	0.85	g/10 imizuzu	I-ASTM D1238
Uxinano kwi-23C	920	kg/m³	I-ASTM D1505
IIPROPATI ZOMKHANYA
Uvavanyo lokuxinana
uxinzelelo kwi-yield, MD	10	I-MPa	I-ASTM D882
uxinzelelo kwisivuno, TD	10	I-MPa	I-ASTM D882
uxinzelelo ngexesha lokuphumla, MD	34	I-MPa	I-ASTM D882
uxinzelelo ngexesha lokuphumla, TD	26	I-MPa	I-ASTM D882
ubude ngexesha lokuphumla, MD	550	%	I-ASTM D882
ubude ngexesha lokuphumla, TD	700	%	I-ASTM D882
IIPROPATI ZAMAPHONE
kwi-45°	60	-	I-ASTM D2457
Umphunga	12	%	I-ASTM D1003
IIPROPATI ZEFILM
Impembelelo yeDart F50	118	g	I-ASTM D1709
Ukumelana neenyembezi
MD	35	g	I-ASTM D1922
TD	135	g	I-ASTM D1922
Ukumelana nokubhoboza	75	I-J/m	Indlela yeSABIC

(1) Iipropati zilinganiswe ngokuvelisa ifilimu engama-30 μ ene-2.5 BUR kusetyenziswa i-100% 920NT.

Iimeko Zokucubungula

Iimeko eziqhelekileyo zokucubungula i-920NT zezi:

Ubushushu bebhareli: 190 - 220°C

Umlinganiselo wokuqhuma: 2.0 - 3.0

Imigaqo yoQhagamshelwano lwezeMpilo, uKhuseleko kunye nokutya

Amanqaku awenzelwanga izicelo zonyango okanye zonyango. Nceda unxibelelane nommeli wentengiso/wezobuchwepheshe wasekuhlaleni ukuze ufumane iinkcukacha.

Ukugcina Nokuphatha

I-polyethylene resin kufuneka igcinwe ngendlela yokuthintela ukuvezwa ngqo elangeni kunye/okanye kubushushu. Indawo yokugcina kufuneka yome kwaye kungcono ingadluli kwi-50°C. I-SABIC ayinakunika isiqinisekiso kwiimeko zokugcina ezimbi ezinokukhokelela ekuwohlokeni komgangatho njengokutshintsha kombala, ivumba elibi kunye nokusebenza kakubi kwemveliso. Kucetyiswa ukuba i-PE resin icutshungulwe zingadlulanga iinyanga ezi-6 emva kokuziswa.

Isikhanyeli

Naluphi na uthengiso lwe-SABIC, abaxhasi bayo kunye namaqabane ayo (ngamnye "ngumthengisi"), lwenziwa kuphela phantsi kwemiqathango eqhelekileyo yokuthengisa yomthengisi (efumaneka xa iceliwe) ngaphandle kokuba kuvunyelwene ngenye indlela ngokubhala kwaye kusayinwe egameni lomthengisi. Nangona ulwazi oluqulethwe apha lunikezelwa ngokunyaniseka, uMthengisi akenzi siqinisekiso, esicacileyo okanye esingacacanga, kubandakanya ukuthengiswa kunye nokungaphuli umthetho wepropathi yobukrelekrele, kwaye akathathi naluphi na uxanduva, oluthe ngqo okanye olungathanga ngqo, ngokumalunga neUKUSEBENZA, UKUFANELEKA OKANYE UKUFANELEKA KOKUSETYENZISWA OKUJOLISWEYO OKANYE INJONGO YALE MVELISO KULO NALUPHI NA USETYENZISO. Umthengi ngamnye kufuneka amisele ukufaneleka kwezixhobo zomthengisi ukuze zisetyenziswe ngumthengi ngovavanyo olufanelekileyo kunye nohlalutyo. Akukho ngxelo yomthengisi malunga nokusetyenziswa okunokwenzeka kwayo nayiphi na imveliso, inkonzo okanye uyilo ejoliswe, okanye ekufuneka itolikwe, ukunika nayiphi na ilayisenisi phantsi kwayo nayiphi na ilungelo lobunikazi okanye elinye ilungelo lobunini bobukrelekrele.

Ngaphambili: Ifilimu ye-ExxonMobil LD165BW1 LDPE

Okulandelayo: Inaliti ye-SABIC M200024T LLDPE