Ifilimu ye-SABIC 222WT LLDPE

Umfanekiso oBonisiweyo weFilimu ye-SABIC 222WT LLDPE

Inkcazo emfutshane:

Sabic Tianjin
I-LLDPE| Ifilimu i-MI=2
Yenziwe etshayina

Ixabiso:1100-1600 USD/MT

Izibuko:Xingang, Qingdao, Shanghai, Ningbo

I-MOQ:17MT

Inombolo ye-CAS:9003-53-6

Ikhowudi ye-HS:390311

Intlawulo:TT, LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Inkcazo

I-SABIC 222WT yi-ethylene-butene copolymer eyenzelwe ukusetyenziswa kwefilimu evuthuzayo. I-222WT ineempawu ezibalaseleyo zoomatshini befilimu njengokuqina, ukumelana nokubhoboza kunye namandla okutsalwa, ikwanazo neempawu ezibalaseleyo zokutywina, i-222WT ine-slip ephezulu kunye ne-antiblock ephezulu.

Iipropati

Ingxowa yelaphu, ingxowa yokuthwala impahla, i-layer coating ebhityileyo, ingxowa yenkunkuma, i-meat packaging kunye nezinye iipakeji zokutya okanye ifilimu ye-lamination, iipakeji zabathengi ngokubanzi njl.

IIPROPATI	IINQOBO EZIQHELEKILEYO	IIYUNITHI	INDLELA YOVAVANYO
IIPROPATI ZEPOLYMER
Izinga lokuhamba kwamanzi anyibilikayo
kwi-190°C kunye ne-2.16 kg	1.9	g/10 imizuzu	I-ASTM D1238
Uxinano kwi-23°C	922	kg/m³	I-ASTM D1505
UKWAKHIWA
Iarhente yokutyibiliza	√	-	-
Iarhente yokulwa neebhloko	√	-	-
IIPROPATI ZOMKHANYA
Uvavanyo lokuxinana
uxinzelelo kwi-yield, MD	10	I-MPa	I-ASTM D882
uxinzelelo kwisivuno, TD	10	I-MPa	I-ASTM D882
uxinzelelo ngexesha lokuphumla, MD	31	I-MPa	I-ASTM D882
uxinzelelo ngexesha lokuphumla, TD	23	I-MPa	I-ASTM D882
ubude ngexesha lokuphumla, MD	450	%	I-ASTM D882
ubude ngexesha lokuphumla, TD	600	%	I-ASTM D882
IIPROPATI ZAMAPHONE
Ukukhazimla
45°	50	-	I-ASTM D2457
Umphunga	16	%	I-ASTM D1003
IIPROPATI ZEFILM
Impembelelo yeDart F50	112	g	I-ASTM D1709

(1) Iipropati zilinganiswe ngokuvelisa ifilimu engama-30 μ ene-BUR ezi-2 kusetyenziswa i-100% 222WT.

Iimeko Zokucubungula

Iimeko eziqhelekileyo zokucubungula i-222WT zezi: Ubushushu be-barrel: 190 - 220°C Umlinganiselo wokuqhuma: 2.0 - 3.0

Ulawulo lokutya

Nceda unxibelelane nommeli wentengiso/wezobuchwepheshe wasekuhlaleni ukuze ufumane iinkcukacha.

Isikhanyeli

Amanqaku awenzelwanga izicelo zonyango okanye zonyango.

Ukugcina Nokuphatha

I-polyethylene resin kufuneka igcinwe ngendlela yokuthintela ukuvezwa ngqo elangeni kunye/okanye kubushushu. Indawo yokugcina kufuneka yome kwaye kungcono ingadluli kwi-50°C. I-SABIC ayinakunika isiqinisekiso kwiimeko zokugcina ezimbi ezinokukhokelela ekuwohlokeni komgangatho njengokutshintsha kombala, ivumba elibi kunye nokusebenza kakubi kwemveliso. Kucetyiswa ukuba i-PE resin icutshungulwe zingadlulanga iinyanga ezi-6 emva kokuziswa.

Isikhanyeli

Naluphi na ukuthengiswa yi-SABIC, abaxhasi bayo kunye namaqabane ayo (ngamnye "ngumthengisi"), kwenziwa kuphela phantsi kwemiqathango eqhelekileyo yokuthengisa yomthengisi (efumaneka xa iceliwe) ngaphandle kokuba kuvunyelwene ngenye indlela ngokubhala kwaye kusayinwe egameni lomthengisi. Nangona ulwazi oluqulethwe apha lunikezelwa ngokunyaniseka, UMTHENGISI AKANIKEKI SIQINISEKISO, ESICACILEYO OKANYE ESINGACACISIWEYO, KUBANDAKANYA UKUTHENGISWA NOKUNGAPHULI IPROPATI YENGQONDO, AKATHATHI NALUPHI NA UXANDUVA, NGOKUTHE NGQO OKANYE NGOKUNGQONGILEYO, NGOKUPHATHELELEKILEYO OKANYE NGOKUFANELEKILEYO, NGOKUPHATHELELE UKUSEBENZA, UKUFANELEKA OKANYE UKUFANELEKA KOKUSETYENZISWA OKUJOLISWEYO OKANYE INJONGO YALE MVELISO KUYO NAYIPHI NA ISICELO. Umthengi ngamnye kufuneka amisele ukufaneleka kwezixhobo zomthengisi ekusetyenzisweni komthengi okuthile ngovavanyo olufanelekileyo nohlalutyo. Akukho ngxelo yomthengisi malunga nokusetyenziswa okunokwenzeka kwayo nayiphi na imveliso, inkonzo okanye uyilo ejoliswe, okanye ekufuneka itolikwe, ukunika nayiphi na ilayisenisi phantsi kwayo nayiphi na ilungelo lobunikazi okanye elinye ilungelo lobunikazi.

Ngaphambili: Ifilimu ye-SABIC 218WJ LLDPE

Okulandelayo: I-Sinopec R546U LLDPE Rotomolding