English
  • intloko_ibhena_01

LLDPE M500026T

Umfanekiso oboniswayo weLLDPE M500026T
  • LLDPE M500026T

Inkcazelo emfutshane:

Uphawu lweSABIC

LLDPE| Isitofu MI=50

Yenziwe eSaudi Arabia

 


  • Ixabiso :1000-1200 USD/MT
  • Izibuko:Huangpu / Ningbo / Shanghai / Qingdao
  • MOQ:1 * 40GP
  • Inombolo yeCAS ::9002-88-4
  • Ikhowudi ye-HS:3901402090
  • Intlawulo :TT/LC
    • Khuphela njengePDF

    Iinkcukacha zeMveliso

    Inkcazo

    I-M500026T yi-Linear Low Density ye-Polyethylene ibakala kunye nokusabalalisa ubunzima be-molecular emxinwa efanelekileyo kwi-injection moldingapplications. Yenzelwe ukunika iipropathi ezihamba phambili ezihamba kakuhle kunye nokuqina okungcono kobushushu obuphantsi, ukumelana noxinzelelo lokuqhekeka kunye neglosi.

    IiNqobo zePropati eziQhelekileyo

    IIPROPATI IINDLELA EZIQHELEKILEYO IIUNITHI IINDLELA ZOKUVAVANYA
    IIPROPATI ZEPOLYMERA   
    Ukuxinana 926 kg/m³ I-ASTM D1505
    Inqanaba lokunyibilika lokunyibilika (MFR)   
    kwi-190℃ kunye ne-2.16 kg 50 g/10 imiz I-ASTM D1238
    IIPROPATI ZOOMATSHINI   
    Amandla e-Flexural 9 MPa I-ASTM D790
    I-Flexural Modulus (1% Secant) 200 MPa I-ASTM D790 A
    Izod Impact Amandla 500 J/m I-ASTM D256
    Ukuqina (Unxweme D) 50 - I-ASTM D2240
    ESCR (10% Igepal), F50 3 Yr I-ASTM D1693B
    ESCR (100% Igepal), F50 6 Yr I-ASTM D1693B
    Uxinzelelo loxinzelelo kwisivuno (50mm/min) 10 MPa ISO 527-2 1A
    Uxinzelelo loxinzelelo ngexesha lekhefu (5mm/min) 12 MPa ISO 527-2 1A
    Ukuxinezeleka ngexesha lekhefu (5mm/min) >100 % ISO 527-2 1A
    IIPROPATI ZOKUTHETHA   
    I-Vicat Softening Point 88 ℃ I-ASTM D1525
    Ubushushu boBubrittleness <-75 ℃ I-ASTM D746

    Iimeko Zokusebenza

    Iimeko zokulungisa eziqhelekileyo ze-M500026T zezi: Ubushushu be-barel: 180 - 230 ° C Ubushushu bobungunda: 15 -60 °C Uxinzelelo lwe-injection: 600 - 1000 Bar.

    IiNgqwalasela zeMpilo kunye noKhuseleko kunye neZilumkiso

    I-M500026T ifanelekile kwisicelo soqhagamshelwano lokutya. Iinkcukacha ezithe vetshe zinikiwe kwiNkcukacha yoKhuseleko lweMaterial efanelekileyo kwaye ngolwazi olongezelelekileyo nceda uqhagamshelane nommeli wasekuhlaleni we-SABIC ukufumana isatifikethi. INKCAZELO: Le mveliso ayijoliswanga kwaye kufuneka ingasetyenziswa kuyo nayiphi naizicelo zamayeza / zonyango.

    Ukugcinwa kunye nokuphatha

    I-polyethylene resin kufuneka igcinwe ngendlela yokuthintela ukukhanya kwelanga kunye / okanye ubushushu. Indawo yokugcina kufuneka yomile kwaye kukhethwa ukuba ingagqithi kwi-50 ° C. I-SABIC ayinakunika iwaranti kwiimeko ezimbi zokugcina ezinokukhokelela ekuweni komgangatho onjengokutshintsha kombala, ivumba elibi kunye nokungonelanga kwemveliso. Kucetyiswa ukuba kusetyenzwe i-PE resin phakathi kweenyanga ezi-6 emva kokunikezelwa.

  • Ngaphambili:
  • Okulandelayo:

    • Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala