HDPE FI0851P

Inkcazelo emfutshane:

Uphawu lweSABIC

HDPE| Ifilimu

Yenziwe eSaudi Arabia

Ixabiso:1000-1200 USD/MT

Izibuko:Huangpu / Ningbo / Shanghai / Qingdao

MOQ:1 * 40GP

Inombolo yeCAS:9002-88-4

Ikhowudi ye-HS:3901200099

Intlawulo:TT/LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Inkcazo

I-HDPE FI0851P bubunzima obuphezulu bemolekyuli ephezulu yoxinaniso lwe-polyethylene resin eyenzelwe ukufakwa kwefilimu evuthelweyo. Le resin inobunzima obubanzi bemolekyuliukuhanjiswa okwenza kube lula ukuqhubekeka. Iifilimu ezenziwe kule resin zibonisa ukuqina okuphezulu, impembelelo ebalaseleyo kunye neempawu zokuqina.

IiNqobo zePropati eziQhelekileyo

IIPROPATI	IINDLELA EZIQHELEKILEYO	IIUNITHI	IINDLELA ZOKUVAVANYA
IIPROPATI ZEPOLYMERA
Inqanaba lokunyibilika lokunyibilika (MFR)
kwi-190 °C kunye ne-21 kg	8	dg/umz	I-ASTM D1238
kwi-190 °C kunye ne-2.16 kg	0.05	dg/umz	I-ASTM D1238
Ukuxinana
Ukuxinana	0.951	g/cm³	I-ASTM D792
IIPROPATI ZOOMATSHINI
Uvavanyo lwe-tensile
amandla oxinzelelo @ yield, MD	35	MPa	I-ASTM D882
amandla oxinzelelo @ isivuno, TD	30	MPa	I-ASTM D882
amandla oxinzelelo @ Break, MD	50	MPa	I-ASTM D882
amandla oxinzelelo @ Ikhefu, TD	48	MPa	I-ASTM D882
uxinzelelo Elongation @ Break, MD	490	%	I-ASTM D882
uxinzelelo Elongation @ Break, TD	500	%	I-ASTM D882
Elmendorf Tear Amandla, MD	17	gf	I-ASTM D1922
Amandla eenyembezi e-Elmendorf, TD	30	gf	I-ASTM D1922
Impembelelo yeDrop Drop	340	g	I-ASTM D1709
IIPROPATI ZOKUTHETHA
Vicat Softening lobushushu
Vicat Softening lobushushu	126	°C	I-ASTM D1525

Usetyenziso

• Ibhegi yokuthenga
• Ingxowa yenkunkuma
• Ilayini yemizi-mveliso

Iimeko Zokusebenza

Iimeko eziqhelekileyo zokusetyenzwa kweFI0851P zezi:

Ubushushu bokunyibilika: 250°C

Ubushushu bokungunda: 15-60°C

Uxinzelelo lwe-injection: 600 - 1000 Bar

Ukugcinwa kunye nokuphatha

Izinto ze-polyethylene kufuneka zigcinwe ngendlela yokuthintela ukukhanya kwelanga kunye / okanye ubushushu. Indawo yokugcina kufuneka yomile kwaye kukhethwa ukuba ingagqithi kuma-50°C. I-SABIC ayinakunika iwaranti kwiimeko zokugcina ezimbi ezinokukhokelela ekuweni komgangatho njengokutshintsha kombala,ivumba elibi kunye nokusebenza kwemveliso enganelanga. Kucetyiswa ukuba kusetyenzwe i-PE resin phakathi kweenyanga ezi-6 emva kokunikezelwa.

Ukuzihlangula

Nayiphi na intengiso ye-SABIC, ii-subsidiary zayo kunye namahlakani (“umthengisi” ngamnye), yenziwa kuphela phantsi kwemiqathango yokuthengisa esemgangathweni (efumaneka ngesicelo) ngaphandle kokuba kuvunyelwene.ngenye indlela ngokubhaliweyo kwaye isayinwe egameni lomthengisi. Ngelixa ulwazi oluqulethwe apha lunikezelwe ngentembeko entle, UMTHENGISI AKAWENZI WARRANTI, ACISENZE OKANYE OKUTHETHWAYO,KUBANDAKANYA NOKUTHENGISWA NOKUNGANIKWA-PHUMTHWA KWEPROPATI YOBUGCISA, OKANYE AKUTHATHWA NALUPHI NA UXANDUVA, ENGQONDI OKANYE ENGACHASANGAYO, NGENXAPHELOUKUSEBENZA, UKUFANELEKA OKANYE UKULUNGELELANA UKUSETYENZISWA OKUHLOSIWEYO OKANYE INJONGO YEZI MVELISO KUSO NAsiphi na isicelo. Umthengi ngamnye kufuneka aqinisekise ukufaneleka kwezixhobo zomthengisi kusetyenziso oluthile lomthengi ngovavanyo olufanelekileyo kunye nohlalutyo. Akukho ngxelo eyenziwe ngumthengisi malunga nokusetyenziswa okunokwenzeka kwayo nayiphi na imveliso, inkonzo okanye uyilo ecetyiweyo, okanye kufuneka ithatyathwe, ukunika naliphi na iphepha-mvume phantsi kwalo naliphi na ilungelo elilodwa lomenzi wechiza okanye elinye ilungelo lepropathi enomgangatho ophezulu wokuqonda.

Ngaphambili: HDPE Q5502BN

Okulandelayo: HDPE FI0750