English
  • ibhena_yentloko_01

Ifilimu ye-ExxonMobil HD6207FL(HTA108) HDPE

Umfanekiso oBonisiweyo weFilimu ye-ExxonMobil HD6207FL(HTA108) HDPE
  • Ifilimu ye-ExxonMobil HD6207FL(HTA108) HDPE

Inkcazo emfutshane:

Uhlobo lwe-ExxonMobil

I-LDPE| Ifilimu i-MI=0.7

Yenziwe eMelika


  • Ixabiso:900-1100 USD/MT
  • Izibuko:Ningbo/Guangzhou/Shenzhen/Qingdao,China
  • I-MOQ:1*40GP
  • Inombolo ye-CAS:9002-88-4
  • Ikhowudi ye-HS:3901100090
  • Intlawulo:TT/ LC
    • Khuphela njengePDF

    Iinkcukacha zeMveliso

    Inkcazo

    I-HTA 108 yifilimu ye-homopolymer HDPE eyenzelwe ukuphucula ukuqina kunye nomqobo kwi-coextrusion okanye kwi-PE blends. Xa ixutywe ne-LLDPE okanye i-metallocene LLDPE, i-HTA 108 iphucula ukusebenziseka kwazo.

    Izicelo

    Ifilimu Eqhumayo, Iingxowa Zesonka, Ukunciphisa Ukuqokelela, Iiphakheji Zokutya, Ukugcwalisa Ifomu Nokutywina, Ukugcwalisa Ifriji...

    Iipropati zeResin Ixabiso Eliqhelekileyo (isiNgesi) Ixabiso eliqhelekileyo (SI) Uvavanyo olusekelwe kwi
    Uxinano 0.961 g/cm³ 0.961 g/cm³ A5TMD1505
    I-Melt Index2 (190*C/2.16 kg) 0.70 g/10 imizuzu 0.70 g/10 imizuzu ASTMD1238
    Isalathisi Sokunyibilika Komthwalo Ophezulu (190℃/21.6 kg) 46 g/10 imizuzu 46 g/10 imizuzu ASTMD1238
    Iipropati zeFilimu Ixabiso Eliqhelekileyo (isiNgesi) Ixabiso eliqhelekileyo (SI) Uvavanyo olusekelwe kwi
    Amandla okuThamba kwiBreak MD 8700 psi 60 MPa I-ASTM D882
    Amandla okuThamba kwiBreak TD 4500 psi 31 MPa I-ASTM D882
    Ukwandiswa kwiBreak MD 510% 510% I-ASTM D882
    Ukwandiswa kwi-Break TD 2% 2% I-ASTM D882
    I-Secant Modulus MD - 1% I-Secant 17000 psi 1200 MPa I-ASTM D882
    I-Secant Modulus TD - 1% I-Secant 25000 psi 1700 MPa I-ASTM D882
    Impembelelo yokuwa kweDart <30g <30g I-ASTM D1709A
    I-Elmendorf Tear Strength MD 10g 10g I-ASTM D1922
    I-Elmendorf Tear Strength TD 200g 200g I-ASTM D1922

    Ingxelo Yezomthetho

    Nxibelelana nommeli wakho weNkonzo yaBathengi be-ExxonMobil Chemical ukuze ufumane ukuthobela imithetho yesicelo soqhagamshelwano lokutya (umz. i-FDA, i-EL, i-HPFB).

    Le mveliso ayenzelwanga ukusetyenziswa kwezonyango kwaye akufuneki isetyenziswe nakweyiphi na imisebenzi enjalo.

    Ingxelo yeNkqubo

    Iisampuli zovavanyo zeVicat Softening Point zilungiselelwe kusetyenziswa i-ASTM D 4703. Zonke iipropati ze-fillm zilinganiswe nge-25 pm (0.98 mill) fillms ezinobukhulu (BUR ye-2.5: 1, i-pocket extrusion kwi-200℃ / 392'F). Iipropati zeefilimu ezixutyiweyo kunye nee-blends zingafumaneka kwi-HTA108 Fact Sheet.

    Amanqaku

    Iipropati eziqhelekileyo azifanele zithathwe njengeenkcazo.
    Imveliso e-1 isenokungafumaneki kwilizwe elinye okanye ngaphezulu kwiindawo ezichongiweyo zokuFumaneka. Nceda unxibelelane noMmeli wakho weNtengiso ukuze ufumane ukuFumaneka okupheleleyo kweLizwe.

  • Ngaphambili:
  • Okulandelayo:

    • Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale