Inaliti ye-ExxonMobil HD56200(HMA016) HDPE

Umfanekiso oBonisiweyo we-ExxonMobil HD56200(HMA016) HDPE Injection

Inkcazo emfutshane:

Uhlobo lwe-ExxonMobil

I-LDPE| Inaliti ye-MI=20

Yenziwe eMelika

Ixabiso:900-1100 USD/MT

Izibuko:Ningbo/Guangzhou/Shenzhen/Qingdao,China

I-MOQ:1*40GP

Inombolo ye-CAS:9002-88-4

Ikhowudi ye-HS:3901100090

Intlawulo:TT/ LC

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Inkcazo

I-HMA 016 yi-HDPE grade, ebonakala ngokusebenza ngokukhawuleza kunye namandla amahle okuchukumisa. Inombala oqaqambileyo kunye nozinzo oluphezulu.

Izicelo

Ukuvalwa, Izikhongozeli Zokupakisha Ukutya, Izinto Zasekhaya, Amathoyizi

Iipropati	Ixabiso Eliqhelekileyo (isiNgesi)	Ixabiso eliqhelekileyo (SI)	Uvavanyo olusekelwe kwi
Uxinano	0.956 g/cm³	0.956 g/cm³	I-ASTM D1505
Isalathisi sokunyibilika (190℃/2.16 kg)	20 g/10 imizuzu	20 g/10 imizuzu	I-ASTM D1238
Ubushushu bokuPhambuka koBushushu (0.45 MPa)	146 °F	64 °C	I-ISO 75-2/B
Ubushushu obuphezulu bokunyibilika	271 °F	133 °C	I-ASTM D3418
Uxinzelelo lweTensile kwi-Yield	3400 psi	23 MPa	I-ISO 527-2/1A/50
Uxinzelelo lweTensile kwi-Yield	10%	10%	I-ISO 527-2/1A/50
Uxinzelelo Lokuxinana Ngexesha Lokuphumla	> 100%	>100%	I-ISO 527-2/1A/50
Imodulus eguquguqukayo	140000 psi	970 MPa	I-ISO 178
Ukumelana noxinzelelo lwendalo 122°F (50℃), 10% i-lgepal	Iiyure ezi-2	Iiyure ezi-2	I-ASTM D1693
Amandla empembelelo eNotched Izod	1.9 ft-lb/kwi-²	4.0 kJ/m²	I-ISO 180/1A

Ingxelo Yezomthetho

Nxibelelana nommeli wakho weNkonzo yaBathengi be-ExxonMobil Chemical ukuze ufumane ukuthobela imithetho yesicelo sokunxibelelana nokutya (umz. i-FDA, i-EU, i-HPFB).

Le mveliso ayenzelwanga ukusetyenziswa kwezonyango kwaye akufuneki isetyenziswe nakweyiphi na imisebenzi enjalo.

Iinkcukacha ezongezelelweyo

Iimpawu ezibunjiweyo zilinganiswe kwisampuli ebunjiweyo ye-4 mm (157.5 mil) ubukhulu obusekwe kwi-ISO 294-1.
Ukulungiswa kwesampulu yobushushu bokujika kobushushu, inaliti isekelwe kwi-ISO1872. Ivavanywe indawo ethe tyaba enobukhulu besampuli obuyi-80mm x 10mm x 4mm.
I-ESCR ilinganiswe kwi-2 mm (78.7 mil) thick compression molded plate (F50, 10% Igepal, 50℃, 122°F)

Amanqaku

Iimpawu eziqhelekileyo: ezi azifanele zithathwe njengeenkcazo.
Imveliso e-1 isenokungafumaneki kwilizwe elinye okanye ngaphezulu kwiindawo ezichongiweyo zokuFumaneka. Nceda unxibelelane noMmeli wakho weNtengiso ukuze ufumane iinkcukacha ezipheleleyoUkufumaneka kweLizwe.

Ngaphambili: Inaliti ye-DOW XZ-89609 HDPE

Okulandelayo: Inaliti ye-SABIC M200056 LDPE